Tel: +86-532-88566601
E-mail: sales@successrigging.com

Contact

Qingdao Success Machinery Co.,Ltd

ADD: Guozhuang Industrial Park, Tongji Subdistrict, Jimo Qingdao

 

TEL: +86-532-88566601

FAX: +86-532-85059139

 

E-MAIL: sales@successrigging.com

WEBSITE: www.successrigging.com

Stainless Steel Eye Bolt Easy To Operate, High Efficiency

① from the processing and assembly work efficiency considerations, in the same machinery or engineering, should minimize the use of fasteners varieties;

② from the economic considerations, should give priority to the use of commodity fastener varieties.

③ According to the expected requirements of the use of fasteners, according to type, mechanical properties, precision and thread to determine the selection of varieties.

 General purpose Stainless Steel Eye Bolts: a lot of varieties, there are hexagonal head and square head of the points. Hexagon head Stainless Steel Eye Bolts are the most common applications, according to the manufacturing accuracy and product quality is divided into A, B, C and other product grades, to A and B-class applications, and mainly for the important, high precision and high impact, vibration or Variable load place. Hexagon head Stainless Steel Eye Bolts according to their head support area size and installation location size, can be divided into hexagonal head and large hexagon head two; head or screw with a variety of holes for the need to use when locking. The square head of the square head has a larger size and force surface, easy to catch the mouth of the wrench or other parts from the beginning and rest, commonly used in the relatively rough structure, and sometimes used in T-slot, easy to Stainless Steel Eye Bolt Loosely adjust the position in the slot. See GB8, GB5780 ~ 5790 and so on.

B) Hinged hole with the Stainless Steel Eye Bolt: the use of Stainless Steel Eye Bolts will be tightly fitted into the hinge hole to prevent the workpiece misalignment, see GB27 and so on.

C) stop Stainless Steel Eye Bolts: a square neck, with the tenon of the points, see GB12 ~ 15;

D) Special purpose Stainless Steel Eye Bolts: T-slot Stainless Steel Eye Bolts, Stainless Steel Eye Bolts and anchor Stainless Steel Eye Bolts. T-slot Stainless Steel Eye Bolts are often used where the connection is often disassembled; the anchor Stainless Steel Eye Bolts are used to secure the rack or motor base in the cement foundation. See GB798, GB799 and so on;

E) High strength Stainless Steel Eye Bolts for steel structures Coupling: For general applications such as buildings, bridges, towers, pipe supports and hoisting machinery for steel structures, see GB3632 and so on.

Practices and characteristics

1. Materials ready to plug the hole special tools, impact drill, sand, cement.

 2. Operation method

(1) the use of the impact of the drill pipe wall within the PVC casing clean, and then use the hair dryer to plug the floating light inside the Stainless Steel Eye Bolt clean.

(2) the sand using fine screen for processing, and then in accordance with the ratio of 1: 1 ratio.

(3) First of all, the use of special tools inside the wall moist with water, and then stir the cement mortar on the plug-in special tools.

(4) the alignment of the tool with the head of the alignment of the first Stainless Steel Eye Bolt, the use of spiral pressure grouting to the opposite side of the eye of the mortar out of the mortar so far, the shear wall on both sides of the excess mortar smear with a trowel.

 Advantages:

1. Work less, easy to operate, high efficiency.

2. Stainless Steel Eye Bolt eye closure dense, anti-leakage effect on the external wall Stainless Steel Eye Bolt.

Actually, the standard argument is that there are no screws and nuts.

Screws are commonly known, with external thread can be called "screw".

The shape of the nut is usually hexagonal, the hole for the internal thread, used to match with the Stainless Steel Eye Bolt, tightly related parts.

Nuts are commonly known, the standard should be called "nut".

The head of the Stainless Steel Eye Bolt is generally hexagonal and the stem has an external thread.

Screws smaller, the head has a flat head, cross head, etc., with external thread bar.

Stud actually called "double stud", both have external thread, the middle is generally light bar. One end of the thread is used to connect with the deep hole, and the short section is connected to the nut.

Standard fasteners are divided into twelve categories, when selected by the use of fasteners and their use of the function to determine.