Tel: +86-532-88566601
E-mail: sales@successrigging.com

Contact

Qingdao Success Machinery Co.,Ltd

ADD: Guozhuang Industrial Park, Tongji Subdistrict, Jimo Qingdao

 

TEL: +86-532-88566601

FAX: +86-532-85059139

 

E-MAIL: sales@successrigging.com

WEBSITE: www.successrigging.com

Eye Bolt And Nut With High Strength, Strong Reliability

High-strength Eye Bolt And Nut for a Eye Bolt And Nut of a classification, with high strength, reliability side. Mainly the introduction of European technology as a prerequisite for road machinery, mining machinery, vibration machinery and equipment, the current domestic production of such products manufacturers rarely. Nylon Eye Bolt And Nuts. Nylon Eye Bolt And Nut is a new type of high anti-vibration anti-tightening parts, can be used in the temperature -50 ~ 100 ℃ ...

Eye Bolt And Nut is a new type of high anti-vibration anti-loose fastening parts, can be used in the temperature -50 ~ 100 ℃ of various machinery, electrical products. The demand for nylon Eye Bolt And Nuts has increased dramatically due to its anti-vibration and anti-loosening performance, which is much higher than that of other ones. The demand for nylon Eye Bolt And Nuts is increasing, such as aerospace, aviation, tanks, mining machinery, automobile transport machinery, agricultural machinery, textile machinery, electrical products and various machinery A variety of anti-loose device, and vibration life to several times higher or even several times.

The main operation of the embedded rosewood Eye Bolt And Nut is injection molding, after heating into the plastic parts inside or direct mold injection, if the use of mold injection, PA / NYLOY / PET melting point are more than 200C, embedded in the Eye Bolt And Nut Hot melt into the plastic parts after the temperature quickly becomes high, after injection molding, the plastic body quickly cooled crystal hardening, if the embedded extrusion nut temperature is still at high temperatures, it is possible ...

Using a variety of embossed wire production (usually lead brass, such as H59,3604,3602) made of copper extrusion nut. Our daily access to the embedded rosette copper extrusion nuts are made of precision automatic lathe processing. The reference standard of the embedded rosewood Eye Bolt And Nut comes from GB / T809.

The main operation of the embedded rosewood Eye Bolt And Nut is injection molding, after heating embedded

To the plastic parts inside or direct mold injection, if the use of mold injection, PA / NYLOY / PET melting point are more than 200 ° C, embedded in the extrusion nut was hot melt into the plastic parts after the temperature quickly increased, after injection molding, plastic The body quickly cools the crystal hardened, and if the temperature of the embedded Eye Bolt And Nut is still at a high temperature, it is possible to pour it into the place where the copper Eye Bolt And Nut comes into contact with the plastic parts to begin to loosen or crack. So in the injection of extrusion nuts are used in the use of copper extrusion nut instead of carbon steel extrusion nut.

There are two ways to form the outer steel knurled nuts, one is the use of copper raw materials after the formation of flowers on the equipment for production, generally in this way the pull pattern for the ruler, the other Is the use of round copper material directly in the production process while tapping the edge of the embossed, this processing can produce some non-standard size of the rolling copper extrusion nut, embedded copper extrusion nut embossed shape can be with the user Choose, such as reticulate, eight-character embossed, embossed characters and other rolling patterns.